HOURS DATE DESCRIPTION DONE BY
Use "SAVE AND CONTINUE" when adding items, not "SAVE".
Using "SAVE" will delete the entire page.
2597.21 Mar 15,2024 New mixing disk, mixing tube, and last chance filter BZ
2536.90 Dec. 05. 2023 New diamond orifice 305322-14 installed, mix disc and tube still BZ
ok but tube was probably misaligned
2532.49 Nov. 28, 2023 Tank completely cleaned by pumping company, dump valve orifice,
new calcium carbonate cartridge installed. BZ
2520.89 Nov 7, 2023 Both ends plugged: HP cutting nozzle, and dump valve. Filters
Replaced: Water in 2x, in-pump-housing fine filters 2x, HP manifold
filter tube, cutting nozzle last chance filter, all replaced. New jewel
and mix disc, and mix tube installed. New jewel for dump valve is
needed: it was ordered. Parts: Tee 201526, o-ring 200905, static seal
300726, mix tube roctec500 #300766-030,
filter for manifold 304104, mix disc 303566,
There were shavings in the dump valve orifice, looking like from
drilling acting in a fitting or something. QC issues! made by Omax. BZ and GR
2426.03 April 12, 2023 Nozzle holder plate clamp had a stuck bolt and had to be BZ
disassembled for the nozzle to be re-seated. New mixing tube.
New on-off valve needle, seat and seals (301927), new last chance
filter.
Also broke, right after fixing the above: Whip 304829-96". Replaced!
2420.02 April 3, 2023 Machine tank cleaned completely, half of all slats replaced, Rocket team and BZ
new bed square, new post mounts, new slat underlay made
from brass
2414.99 March 22, 2023 Replaced: Pumpe head port adapter 300729, HP tee 201526, 14" HP
nippel 301337-14, 3" HP nippel 301337-3, manifold filter 304104,
dump valve rebuild kit, dump valve jewel orifice 0.013" 302028-13,
course filter, fine filter 0.5 micron, last chance filter on the cutting
head, mixing tube and mixing disc BZ
2386.97 Jan. 26, 2023 New 90 deg elbow block above swivel joint above cutting head BZ
#201514
2330.00 Sept 25, 2022 mix tube Dan Skjaveland
2254.57 Fri Oct 7, 2022 3inch nippel HP line between pump manifold and HP transducer
replaced (pin hole) part #301337-3 BZ
2293.55 Thur, May 19, 2022 Svivel joint above nozzle - housing replaced and some of
the seals. HP nippel from that downward 16.75inches long
was also replaced BZ
2247.03 Thurs Feb 24, 2022 coarse and fine filters all replaced BZ
2198.31 Tue Oct 19, 2021 HP line above nozzle replaced, 16.75" long 3/8" 301337 BZ
2180.42 Tue Sept 7,2021 cyl #1 pump rebuilt: plunger, all seals, backup ring,
coolant housing u cup seal BZ
2153.43 Friday June 11,2021 new mix disc, mix tube BZ
2078.95 Tuesday Sept 1, 2020 new mixing disc, mixing tube, last chance filter BZ
2008.08 Thur Feb 13, 2020 Replaced VFD main motor drive, done by 3phase Systems
in Delta, BC. Complete rebuild of pump with all seals BZ
1984.18 Thur Jan 2, 2020 Replaced port adapter seals on the manifold's safety
pressure valve attachment side, numbers: 200905 + 300726 BZ
1966.06 Mon Dec.2, 2019 New elbow [201514] above nozzle after drip leak BZ
1913.87 Fri Sept 06, 2019 New coarse and fine filters, new mix disc and new mix tube BZ
1913.80 Wed Sept 04 2019 WJ tank cleaning by UBC Rocket
1864.25 Tue July 2, 2019 Mixing disc, mixing tube and last chance filter replaced BZ
1788.42 Fri March 15, 2019 dump valve stem seal replaced #302094 BZ
1760.29 Tues. Feb 05, 2019 Tank cleaned out, with SUMAS Inc vac truck arranged for
by Doug Yuen from ChemBio mach shop. BZ
1747.13 Tues. Jan 22, 2019 Charge pump-filter bypass valve replaced (hallelujah)
plus one set of fine filters. BZ
1741.42 Wed. Dec 19, 2018 Wet end of charge pump replaced with stronger unit, 140
GPH instead 100. Part # 400649 BZ
17xx.xx Tue. Dec 18, 2018 High pressure flex line (whip) replaced, #
1717.39 Friday Nov 2, 2018 On-Off Valve rebuild, mixing disc and tube, last chance filter BZ
1703.97 Mon Oct.01, 2018 Float valve in the little tank that is connected to the charge
pump was replaced as most likely cause of flooding in the room BZ
1666.71 Fri Jul 13 Both On-Off and Dump Valve rebuild (kit 301927), On-Off BZ
valve body replaced (#301477) since it was cracked, both
valve actuators replaced with new, oil-free version (#312827),
Dump Valve jewel replaced (302028-13)
1665.08 Tue July 10, 2018 On-Off valve stem seal (302094) replaced but still leaks.
Need to order complete rebuild kit (301927) BZ
Machine was offline/stored because of move from Hebb Bldg to Hennings Bldg from Dec 2017 to April 2018.
Comments (0)
You don't have permission to comment on this page.