Status: ONLINE
Access during Hebb constrution exclusively by entering
the ChemPhys main entrance (near fountain, across from
the UBC bookstore). Enter there, go one floor down.
The key card on the lanyard will open that door after hours.
Laser Settings - Google Spreadsheet
Video - How To Use The Laser Cutter
Click here for all instructional videos
When done, please fill in the log: https://goo.gl/tsa7zw
Calendar:
|
Name + Group: |
Will be using laser on (date): |
from (time): |
to (time): |
|
|
|
|
|
| |
To edit this page, click on 'edit' (top of this page) and then 'log in'. Same account as the waterjet wiki, therefor:
email address: waterjet@phas.ubc.ca
password: omax123
Make and model:Universal VersaLaser VLS 4.60 
Manuals: - How to use the EngPhys laser cutter (this is our own manual)
- Getting Started" (company instruction manual)
Useful Links: - Tips and Tricks from other users here at Phas.
DO NOT CUT polycarbonate, PVC, or any other material containing chlorine.
ALWAYS TURN ON THE AIR to keep the laser lens clean.
OFFSET: If you want to cut parts precisely, offset lines by 0.127mm (0.005"), this corresponds to
a laser beam diameter of 0.254mm (0.010")